|
| |
|
Cheapham.com
by
Hometek
|
|
Quality
Amateur Radio, Broadcasting, Scanners and Marine Band Electronic Supplies at a Discount Price !
|
|
DJ-X2000T
SPECIFICATIONS
- Receiving Range: 0.1000 to 2,149.999950MHz (Cellular frequencies
including image reception blocked on T version)
- Mode: NFM/WFM(mono,stereo)/AM/CW/USB/LSB
- Antenna imp.: 50 ohms
- Antenna terminal: BNC
- Supply voltage: DC 4.8V (Ni-Cd battery pack EBP-33,34,37N), DC 6V
with EDH-16 AA battery case, DC 10-16V external power source.
- Typical operation with Alkaline AA in EDH-16: 30hours (1:4 battery
saver ON)
- Current consumption: approx. 150mA in normal reception, approx.
50mA with 1:4 battery saver at 6Vdc power source
- Operating temperature: -10 to 60 C or 14 to 140 F
- Frequency stability: Within +/- 2.5 ppm at operating temperature
range AF output: 100mW or more 10% THD
- Channel steps: Auto, 50, 100, 200, 500Hz, 1, 2, 5, 6.25, 8.33, 9,
10, 12.5, 15, 20, 25, 30, 50, 100, 125, 150, 200, 250, 500KHz,
user-programmable
- Memory channels: 2,000 / 50banks, 40channels in each bank
- Program-Scan: 20 pairs
- Priority watch memory: 1
- Dimension without projection: 57 x 150 x 27.5 mm
- Weight: 200g
- System: Triple-conv. Superheterodyne
1st IF: 814.5MHz or 304.3MHz
2nd IF: 45.05MHz
3rd IF: 455KHz
- Typical sensitivity:
FM/WFM 12dB SINAD, AM/SSB/CW 10dB S/N
- AM:
0.1 to 5.0 MHz: 1.5uV
5.0 to 900MHz: 1.0uV
- SSB/CW:
0.1 to 5.0 MHz: 0.6uV
5.0 to 900MHz: 0.5uV
900MHz up: 1.0uV
- NFM:
5.0 to 900MHz: 0.5uV
900MHz up: 2.0uV
- WFM:
5.0 to 900MHz: 2.0uV
900MHz up: 4.0uV
(An indication purposes only. The actual value may vary depending on where it
is measured.)
ACCESSORIES
- EBP-33N 4.8V 650mA Ni-Cd pack (extra-small)
- EBP-37N 4.8V 700mA Ni-Cd pack (standard)
- EBP-34N 4.8V 1.2A Ni-Cd pack (long-life)
- EDC-88 multi-voltage switching quick charger
- EDH-16 Dry cell case
- EDC-36/EDC-16B Cigar-plug DC cable with filter
- EME-6 Earphone
- ESC-28 Soft-case for EBP-33N
- ESC-29 Soft-case for EBP-37N/EDH-16
- ESC-30 Soft-case for EBP-34N
- EBC-6 Mobile-bracket
- EDC-37 External DC power-supply cable
* Standard accessories may vary depending on the version. Please contact your
dealer for details.The US version comes with EBP37N, EDC88,EBC3 belt-clip, a
hand-strap, an antenna, an instruction manual and a warranty certificate.
* Variety of battery-packs and accessories are also available from after-market
manufactures but use of Non-Genuine accessories may void warranty. Do not use
Alinco original charger to charge NI-MH battery packs available from
after-market battery manufactures.
|