|
West Mountain Radio Products

RIGblaster
Product Comparisons
A
RIGblaster is the easiest way to properly connect your radio to your computer's
sound card so that you may operate using any present or future ham radio sound
card software.
|
RB/PR/CUSB -- RIGblaster Pro 120 VAC, COMPLETE
For USB or Serial Port
RS232
Includes:
-
RIGblaster
pro - 12 VDC Wall Power Supply - 3' Mic Cable - 6' DB9M to DB9F Serial Cable
- 6' Mini Plug Audio Cables - (6) - Cable Label Set - USB Interface Cable -
Owners Manual (PDF Format) - Free CD-ROM - Accessory Kit, White Jumpers -
(11),Blue Shunt Jumpers - (6), 1/8" Mini to 1/4" Adapter
Your discounted price
$259.95
|
|
RB/PL/CUSB -- RIGblaster Plus 120 VAC, COMPLETE For
USB or Serial Port
FOR RADIOS WITH 8 PIN ROUND OR RJ45 MODULAR MIC CONNECTOR
RADIOS. INCLUDES: 12V WALL SUPPLY, MIC CABLE & FREE CD 2-3’ STEREO 1/8”
MINI PLUG CABLES, 1-6’ DB9M TO DB9F
Your discounted price
$137.95
|
|
RB/NO/CUSB
-- RIGblaster nomic Universal, COMPLETE -
USB/SERIAL
PORT MODEL
FOR RADIOS WITH 8 PIN
ROUND OR RJ45 Modular MIC CONNECTORS INCLUDES: 8 PIN ROUND and RJ45 MIC CABLES & FREE CD , 2-3’
STEREO 1/8” MINI PLUG CABLES, 1-6’ DB9M TO DB9F SERIAL CABLE
Your discounted price
$79.95
|
RIGtalk
USB rig control interface 
-
A
RIGtalk is a USB to serial converter with TTL* output.
-
USB
rig control of radios with Positive logic TTL* level interfaces: CAT or
CI-V.
-
For
the first time you can control your radio with a computer’s USB. port.
-
Rig
control allows your radio to share frequency mode and band information
with your logging software without tying up a serial port.
-
Compatible
with USB 2.0 or lower.
-
Convenient
pocket sized USB dongle design.
-
Tough
full ground plane 1/16" fiberglass PC board with heavy shrink tube
cover.
-
Order
it with a pre-wired and tested cable to fit your radio.
-
Cables
available for Icom and Ten Tec CI-V (1/8" mini plug) and Yaesu CAT*
(DIN connectors).
-
Use
any rig control software that is compatible with your computer and radio.
Your discounted price
$45.00
|
|
CIV/CBL -- ICOM/TEN TEC
CI-V RIG CONTROL CABLE
6’ 1/8” stereo mini phone
plug to 1/8” stereo mono phone plug cable. For use with a RIGblaster plug
&
play or RIGtalk for CI-V rig
control.
Your discounted price
$8.75
|
|
CATMINI/CBL
-- YAESU TTL CAT RIG CONTROL CABLE
FT-100,100D,817,857,897E
1/8” stereo mini phone plug to 8 pin mini DIN. For use with a RIGblaster
plug
& play, pro or RIGtalk for TTL CAT rig control.
Your discounted price
$12.75
|
|
CAT/6D/CBL
-- YAESU TTL CAT RIG CONTROL CABLE
FT-736/747/767/980/990/1000
1/8” stereo mini phone plug to 6 pin DIN. For use with a RIGblaster plug
& play, pro or RIGtalk
for TTL CAT rig control.
Your discounted price
$12.75
|
|
RIGblaster
Data Jack plug & play Complete 
| FEATURES: |
- USB powered - No External Power Required
- CD-ROM with Device Drivers, Owners Manual & WMR Collection of
Ham Radio Sound Card Software
- Compact - great for portable or QRP operation
- Built in TTL CAT or CI-V rig control
- CW keying
- Carrier detect (COR) for Echolink Ready (see Support
Page for detail on activating this feature)
- Isolated Audio and Keying
- LED indicators: USB, PTT and CW
|
Your discounted price
$99.00
|
|
RIGblaster
p&p Adapter for Icom 8 pin ACC1
Your discounted price
$9.75
|
|
RIGblaster
p&p Adapter for Icom 13 pin ACC1
Your discounted price
$9.75
|
|
RIGblaster
p&p Adptr for Kenwood ACC2 13 pin DIN
Your discounted price
$9.75
|
|
|
See our accessory cables for
adapting radios with other styles of mic. cables below

PWRgate PG40 Backup Power
System
A
RIGrunner is the most convenient and safest way to connect all your 12 VDC
equipment to a power source. It is a 13.8 VDC power panel that uses the
excellent Anderson Powerpole connectors. Standardize all of your 12 VDC
connections using the amateur radio ARES & RACES, RSGB, ARRL Powerpole
system.
|
New
CBA II Computerized Battery Analyzer
-
NEW:
Super 12 bit resolution below 3 amps.
-
NEW:
Perform tests accurately down to 0.1 amps!
-
NEW:
Updated software and help documentation!
-
Easy
to use and foolproof.
-
Perform
tests like a pro!
-
Analyze
exact battery characteristics.
-
Match
cells or pick the best pack.
-
Check
for battery aging.
-
Cycle
and condition batteries.
-
Test
at up to 150 watts or 40 Amps.
Plug and Play high speed USB interface, with easy to use and intuitive
Windows software on CD ROM.
Your discounted price
$99.95
|
|
CBA
Magnetic Temperature Probe
Your discounted price
$10.95
|
|
Super
PWRgate PG40S Power Gate/Charger
-
A Super PWRgate is a 12 volt backup power system rated at 40
amperes continuous from either a Power Supply or a Battery.
-
The Super PWRgate has a built-in four-stage battery charger
with selectable current rates of 1, 4, 7 or 10 amperes.
-
Connected equipment will instantly switch to battery during
a power blackout or power supply failure.
-
Uses two 80 ampere Schottky diodes as an OR-Gate to isolate
the battery and power supply from each other.
-
Forward voltage drop of less than 0.3 volts at 20 A.
-
Optimized for use with GELLED & AGM type batteries, but
will keep flooded lead acid and marine type batteries near full charge as
well.
-
Measures 1.64" x 3.9" x 5" and uses Anderson
PowerPole connectors.
Your discounted price
$109.95
|
|
PWRgate
PG40 Backup Power System
-
PWRgate PG40 is a
simple 12VDC backup power system.
-
Provides continuous
uninterrupted power to your Ham Station.
-
Both the Power
Supply and the Battery are isolated from each other.
-
Built-in charger
circuit to maintain your battery.
-
Rated at 40 amperes
using 80 ampere Schottky diodes with only 0.4 VDC forward drop.
-
Measures 1.64"
x 3.9" x 5" and uses Anderson PowerPole connectors.
Your discounted price
$64.95
|
|
RIGrunner
8012 DC Power Panel COMPLETE
The
RIGrunner 8012 is the latest addition to the RIGrunner line of DC Distribution
Panels from West Mountain Radio. The 8012 provides distribution of up to 80 amps
at 12 VDC across two 40 amp busses.
-
80
amp 12 VDC continuous duty with 6 outlets on each of two 40 amp busses
-
Precision
voltage monitoring with visual/audible alarm for over and under voltage
-
6'
#8 AWG Power Supply Cable terminated in 1/4" ring terminals
-
Includes
12 pair 30 amp Anderson Powerpole connectors
-
Includes
Spare Fuse Kit containing 1 ea 40, 30, 25, 20, 10, 5 & 1 amp fuse
Your discounted price
$134.95
|
|
RR/4010S/C
-- RIGrunner 4010S, DC Power Panel COMPLETE
AUTOMATIC OR MANUAL
SWITCHING DC POWER PANEL, 40 AMPS MAX, 10 OUTLETS, PRECISION DC VOLTAGE MONITOR
AND ALERT COMPLETE WITH 1-PS/CBL/6 (6 FOOT SUPPLY CABLE) AND 1- C30/PK/12 (12
PAIRPOWERPOLE KIT).
Your discounted price
$119.95
|
|
RR/4010S
-- RIGrunner 4010S, DC Power Panel
AUTOMATIC OR MANUAL
SWITCHING DC POWER PANEL, 40 AMPS MAX, 10 OUTLETS, PRECISION DC VOLTAGE MONITOR
AND ALERT SOLD WITHOUT CABLE OR EXTRA POWERPOLES.
Your discounted price
$109.95
|
|
RR/4012/C
-- RIGrunner 4012, DC Power Panel COMPLETE
INTELLIGENT
DC POWER PANEL, 40 AMPS MAX, 12 OUTLETS, PRECISION DC VOLTAGE MONITOR AND ALERT
COMPLETE WITH 1-PS/CBL/6 (6 FOOT SUPPLY CABLE) AND 1- C30/PK/12 (12 PAIR
POWERPOLE KIT).
Your discounted price
$109.95
|
|
RR/4012
-- RIGrunner 4012, DC Power Panel
INTELLIGENT DC POWER
PANEL, 40 AMPS MAX, 12 OUTLETS, PRECISION DC VOLTAGE MONITOR AND ALERT. SOLD
WITHOUT CABLE OR EXTRA POWERPOLES.
Your discounted price
$99.95
|
|
RR/4008/C
-- RIGrunner 4008, DC Power Panel COMPLETE
INTELLIGENT DC POWER
PANEL, 40 AMPS MAX, 8 OUTLETS, PRECISION DC VOLTAGE MONITOR AND ALERT COMPLETE
WITH 1-PS/CBL/6 (6 FOOT SUPPLY CABLE) AND 1- C30/PK/12 (12 PAIR POWERPOLE KIT)
Your discounted price
$99.95
|
|
RR/4008
-- RIGrunner 4008, DC Power Panel
INTELLIGENT DC POWER
PANEL, 40 AMPS MAX, 8 OUTLETS, PRECISION DC VOLTAGE MONITOR AND ALERT SOLD WITHOUT CABLE OR EXTRA
POWERPOLES.
Your discounted price
$88.95
|
|
RR/4005/C
-- RIGrunner 4005, DC Power Panel COMPLETE
INTELLIGENT DC POWER
PANEL, 40 AMPS MAX, 5 OUTLETS, PERFECT FOR MOBILE OR EXPANSION. COMPLETE WITH
1-PS/CBL/6 (6 FOOT SUPPLY CABLE) AND 1- C30/PK/6 (6 PAIR POWERPOLE KIT).
Your discounted price
$69.95
|
|
RR/4005
-- RIGrunner 4005, DC Power Panel
INTELLIGENT DC POWER
PANEL, 40 AMPS MAX, 5 OUTLETS, PERFECT FOR MOBILE OR EXPANSION. SOLD WITHOUT CABLE OR EXTRA
POWERPOLES.
Your discounted price
$59.95
|
RIGrunner
ACCESSORIES
|
WHAT/MTR
-- WhattMeter with PowerPoles
-
The
Whatt Meter is designed to make voltage, amperage and power measurement easy
and fast.
-
Simultaneously
reads Volts, Amps, Watts and Amp/hrs, fully automatic.
-
These
new meters take the guesswork out of power measurement.
-
Rugged
and easy to use, just plug it in to any PowerPole circuit.
-
Makes
it easy to read power consumption and battery capacity.
-
Accurately
reads up to 75 amps
CURRENTLY
OUT OF STOCK
Your discounted price
$64.95
|
|
C30/PK/12
-- PowerPole 30 A. 12 pair connector kit
30 A. POWERPOLE
CONNECTORS FOR #12-14 OR SMALLER WIRE.
KIT INCLUDES: 24PCS. 12-14 GAUGE TERMINALS, 12-RED BODIES, 12-BLACK BODIES.
Your discounted price
$11.00
|
|
C45/PK/12
-- PowerPole 45 A. 12 pair connector kit
45 A. POWERPOLE
CONNECTORS FOR #10-12 WIRE.
KIT INCLUDES: 24PCS. GAUGE TERMINALS, 12-RED BODIES, 12-BLACK BODIES.
Your discounted price
$14.95
|
NEW PWRcrimp Powerpole Crimp Tool

- High performance Powerpole crimp tool for a
reasonable price.
- Crimps all three sizes of Powerpole contacts; 15,
30 and 45 amp.
- Ratcheted mechanism assures proper crimps every
time.
- Contact positioner holds contacts correctly while
crimping.
- Far faster and better than soldering.
- The highest strength and the lowest resistance
connections possible.
- Long high leverage handle makes even 45 amp 10
gauge crimps easy
Your discounted price
$48.95
|
|
EX/CBL/3
-- 3’ PowerPole Extension Cable
3 FOOT 12 GAUGE
RED/BLACK CABLE WITH A PAIR OF POWERPOLES ON BOTH ENDS
Your discounted price
$5.49
|
|
EX/CBL/6
-- 6’ PowerPole Extension Cable
6 FOOT 12 GAUGE
RED/BLACK CABLE WITH A PAIR OF POWERPOLES ON BOTH ENDS
Your discounted price
$6.49
|
|
EX/CBL/10
-- 10’ PowerPole Extension Cable
10 FOOT 12 GAUGE
RED/BLACK CABLE WITH A PAIR OF POWERPOLES ON BOTH ENDS
Your discounted price
$7.49
|
|
PS/CBL/6
-- PowerPole to Ring terminal 6’ supply cable
6 FOOT 10 GAUGE
RED/BLACK CABLE WITH 2-1/4” RING TERMINALS ON ONE END AND A PAIR OF POWERPOLES
ON THE OTHER END. TO CONNECT A RIGRUNNER TO A POWER SUPPLY.
Your discounted price
$6.49
|
|
12
Gauge Red/Black ZipCord
Extra flexible soft bare copper stranding. Temperature
range: 80°c (+176°F to -40°F) Automotive grade "GPT" with VW-1
flame retardant Color coded Red and black PVC insulation which is oil & gas
resistant. 2/C "ZIP" Cord construction for easy separation and
installation. This Red/Black Zip Cord is intended for use in DC power
applications such as: Amateur Radio, Auto/Stereo, etc.
Your discounted price
$.45/foot
(Adjust
Cart QTY to desired number of feet)
|
RIGblaster
ACCESSORIES
|
4T8/K1T
-- 4 PIN RADIO TO 8 PIN RIGblaster conversion kit
M4/CBL
and a 6” inline 4 pin jack to 8 pin adapter and instruction/jumper sheet
Your discounted price
$18.95
|
|
M4/CBL
-- 4 PIN SCREW ON CUSTOM MIC CABLE, 3 ft
(RJ45
TO 4 PIN MIC.) Included with 4 pin conversion kit. Converts nomic 8 or RJ to a 4
model
Your discounted price
$12.49
|
|
RJ/CBL
-- RJ45 CUSTOM MIC CABLE, 3 ft
(RJ45
TO RJ45) Converts nomic 8 or 4 to a RJ model.
Your discounted price
$6.49
|
|
FT100/CBL
-- Yaesu FT100 MIC CABLE, 3 ft
(RJ45 TO Modular 6 WIRE)
Comes with Nomic Yaesu Modular6 and may be used with any other model.
Must be used to connect an FT-90, FT-100, FT-1500, FT-2600, FT-7100, FT-8100,
FT-8500, & FT-8900
to a RIGblaster. The mic. supplied with these radios
is not compatible with any RIGblaster.
Your discounted price
$12.49
|
|
ST/CBL
-- STRIPPED END MIC CABLE, 3 ft
(RJ45 TO STRIPPED &
TINNED END) Not included with any model and may be used with any model. May
be used to make your own cable for any radio connection including rear panel.
Your discounted price
$3.89
|
|
CW/CBL
-- 1/4” PHONE PLUG MIC CABLE, 3 ft
(RJ45
TO 1/4" STEREO PHONE PLUG) Not included with any model as a mic. cable
(Drake & Collins)
Your discounted price
$13.49
|
|
DC/CBL
-- 12 VOLT DC CORD, 6 ft
For
operation from 12 Volt DC mobile operation or use in other countries.
Your discounted price
$4.49
|
|
KN13/FSK/CBL
Kenwood 13 pin DIN - Fixed Level Audio/FSK Cable Your discounted price
$19.49
|
|
IA/CBL
-- ICOM ACC1 Jack Audio Cable, 6 ft.
To connect only fixed
level receive audio using an Icom’s ACC1 jack. Not needed if a variable level
audio jack is used. The mic. jack must be
used for transmit.
Your discounted price
$10.49
|
|
817/CBL
-- YAESU Data Port Fixed Level Audio Cable, 6 ft.
To connect only fixed
level receive audio using a Yaesu’s Data Port jack, FT817 and other models.
Notneeded if a variable level audio jack is used. The mic. jack must be used for
transmit.
Your discounted price
$10.49
|
|
IA/FSK/CBL
-- ICOM ACC1 Jack Audio Cable
To connect only fixed
level receive audio and FSK keying using an Icom’s ACC1 jack. Not needed if a
variable level audio jack is used. The mic. jack must be used for transmit.
Your discounted price
$15.49
|
|
IA13/FSK/CBL
-- ICOM 13 pin DIN Cable
Fixed Level Audio/FSK
Cable, 6 ft.
To connect only fixed level receive audio and FSK keying using a Icom ACC jack,
IC706s, 703, 718 and
other models. The FSK connection is only usable with a RIGblaster plus or pro.
The mic. jack must be
used for transmit.
Your discounted price
$15.49
|
|
YA/FSK/CBL
-- Yaesu 4 pin DIN
Fixed Level Audio/FSK
Cable, 6 ft.
To connect only fixed level receive audio and FSK keying using a Yaesu RTTY
jack, FT990,1000 and
other models. The FSK connection is only usable with a RIGblaster plus or pro.
The mic. jack must be
used for transmit.
Your discounted price
$15.49
|
CLRspkr - ClearSpeech®
DSP Noise Reduction Speaker
by West Mountain
Radio

-
Amplified Loudspeaker with Clearspeech® DSP
noise reduction
-
EXTREMELY effective noise reduction for Voice and CW
-
Rotary Switch for Out, Lo, Med, Hi, and Max noise reduction
-
Contains a 4 inch loudspeaker and 2 watt power amplifier
-
Small, lightweight, with mounting bracket - Ideal for mobile
operation
-
Works great in the home station too
-
Switched output for your own station speaker
-
Plugs into the speaker or headphone output on the radio
-
On-Off switch with green indicator LED
-
Blue LED flashes digital overload "clipping"
-
6 ft power cable with Powerpole® connectors
-
6 ft audio cable with 1/8 inch mono plug
The
CLRspkr is a small loudspeaker containing a ClearSpeech® adaptive
noise reduction circuit and audio amplifier.
It is ideal for mobile radio operation. Noise reduction is
superb. The DSP passes the voice and CW sounds, while attenuating noise, such as
hum, hiss, whistles, static. It effectively removes heterodynes, ignition noise,
lightening crashes, power line noise, and hum. The process is dynamic and
changes with the interference and the signal, but the effect is rewarding.
Mobile voice operation is fun without all that background noise.
The DSP recognizes the intermittent nature of CW and allows it
to pass noise free.
The CLRspkr may be mounted in any convenient location. The
bracket permits tilt aiming. Its audio cable plugs into the speaker output on
the radio. Connect the powerpoles to any convenient 12 volt supply. The 6 foot
cables may be lengthened with extensions, if needed.
The CLRspkr works well in the home station too. There is a 1/8
inch phone jack on the back for connection to an external 8 or 4 ohm
loudspeaker. This disconnects the internal speaker.
Your discounted price $199.00
ClearSpeech® is a
registered trademark of NCT Group, Inc.
|
CLRdsp - ClearSpeech®
DSP Noise Reduction Processor

-
Speaker and Headphone Amplifier with Clearspeech®
DSP noise reduction
-
EXTREMELY effective noise reduction for Voice and CW
-
Rotary Switch for Out, Lo, Med, Hi, and Max noise reduction
-
Contains a 4 watt (into 4 ohms) power amplifier
-
Built in a heavy aluminum case for use in the home station
or mobile
-
Headphone output switches off your station speaker
-
Plugs into the speaker or headphone output of a radio
-
On-Off switch with green indicator LED
-
Red LED flashes digital overload "clipping"
-
6 ft power cable with Powerpole® connector
-
DIMENSIONS: 1.5" High x 4.25" Wide x 5.25"
Deep (6.0" Including Knobs)
| The
CLRdsp is a outboard processor unit with ClearSpeech®
adaptive noise reduction circuit and audio amplifier.
It is ideal for use in a home station or for mobile radio operation.
Noise reduction is superb. The DSP passes the voice and CW sounds, while
attenuating noise, such as hum, hiss, whistles, static. It effectively
removes heterodynes, ignition noise, lightening crashes, power line
noise, and hum. The process is dynamic and changes with the interference
and the signal, but the effect is rewarding.
The DSP recognizes the intermittent nature of CW and allows it to
pass noise free.
The CLRdsp may be mounted in any convenient location or fits
perfectly under our COMspkrs. Supplied with 6' audio cables to connect
to the speaker output of most radios and to connect to most speakers.
Connect the powerpoles to any convenient 12 volt supply.
The CLRdsp works well in the mobile station too. There is a 1/8 inch
phone jack on the back for connection to any external 8 or 4 ohm
loudspeaker or to an amplified speaker such as any computer speakers or
our COMspkrs. The front panel headphone jack disconnects the external
speaker.
|
Your discounted price $199.00
ClearSpeech® is a
registered trademark of NCT Group, Inc.
|
COMspkr by West Mountain
Radio

RF Interference Resistant
Computer Speaker System
If
you, your family or your neighbors haven't heard your signal coming from their
computer speakers you are quite a lucky ham. The COMspkr will solve this
interference problem. The COMspkr is an RF proof amplified stereo computer
speaker system, designed for the computer in your ham station or any computer
near your ham station.
The COMspkrs look good in a ham station or at a computer desk.
They have better sound quality than most two-piece computer speakers. The audio
quality is especially good for music or voice with 3 watts per channel. They may
be used in mono or stereo arrangements with a radio instead of a computer, or
with an MP3 player.
The COMspkr:
-
Intended as a replacement for RF interference prone Computer
Speakers
-
An amplified speaker system optimized for operation in close
range of any radio transmitter.
-
Exceptionally high rejection of radio frequency interference
from 1 to 1000 MHz.
-
Stereo High Fidelity response for use with voice or music.
-
High acoustic power output that can be heard clearly in a
noisy environment.
-
Built in amplifier assures compatibility with most computers
and/or two way radios.
-
Comes complete with audio cables and UL approved wall power
supply.
-
Solid, resonance free, wooden cabinets.
-
Specifications:
-
INPUT: Stereo line level 1/8" mini jack.
-
OUTPUT: Nominal 3 watts per channel
-
DIMENSIONS: H 8.375" W 4.125" D 5.25"
(each spkr)
-
WEIGHT: 72 oz. (complete
Your discounted price $65.00
|
|
|
PowerPole®
is a registered trademark of Anderson
Power Products
Cheapham® is a registered trademark of Hometek
Copyright
© 2007 Hometek.
All rights reserved.
|