Product Description
Samlex SEC-1235M 30 Amp Switching Power Supply
This high efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 30 Amps with an AC input of 120 Volts, 60 Hz (230 Volts, 50 Hz possible by internal jumper setting). These advanced switch-mode DC power supplies were designed specifically for land mobile radio applications. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with front panel ammeter and voltmeter and a detachable power supply cord with NEMA 5-15P plug. Features include over-load, short-circuit, over-temperature and over voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.
Specifications:
AC INPUT NOMINAL AC INPUT VOLTAGE 120 VAC (100-130VAC), 50/60 Hz : Factory Preset 230VAC (200 – 260VAC), 50/60Hz: By internal jumper setting
INPUT CURRENT 7.5 A @ 120 VAC; 3.5A @ 230VAC INPUT CURRENT AT NO LOAD 120 mA ± 10% @120VAC INRUSH CURRENT AT STARTUP 30A +/- 5A for < 5 ms
DC OUTPUT OUTPUT VOLTAGE 13.8VDC ± 0.1V OUTPUT CURRENT Continuous: 30A; Current Limit: 35A, Auto recovery
OUTPUT NOISE AND RIPPLE < 150 mV Peak to Peak PEAK EFFICIENCY 85% +/-5%
DESIGN TYPE Switch Mode Power Supply (SMPS) with Fixed Frequency Pulse Width Modulation (PWM) OUTPUT SIDE SWITCHING FREQUENCY 30.5 KHz
OUTPUT METERING Voltmeter and Ammeter
PROTECTIONS SHORT CIRCUIT, OVERLOAD Constant Current Limiting at 35A;
Auto Reset OVER VOLTAGE Regulated by PWM Controller
OVER TEMPERATURE Output shuts down when Power Transformer winding temperature ≥ 105°C ± 5°C / 221°F ± 9°F;
Auto reset on cooling down to ≤ 75°C ± 5°C / 167°F ± 9°F
COOLING FORCED AIR Temperature controlled fan. ON when Power Transformer winding temperature is ≥ 60°C ± 5°C / 140°F ± 9°F; OFF when cools down to ≤ 40°C ± 5°C / 104°F ± 9°F
FUSE INTERNAL AC SIDE FUSE, 120VAC INPUT (PRESET) 5 mm x 20 mm Glass Fuse ; 250V, 8A, Time Delay Type ; Littelfuse - “218008”
INTERNAL AC SIDE FUSE, 230VAC INPUT (BY INTERNAL JUMPER SETTING) 5 mm x 20 mm Glass Fuse ; 250V, 4A, Time Delay Type ; Littelfuse - “218004”
COMPLIANCE SAFETY UL safety listed as “Information Technology Equipment Power Supply” for USA (UL Standard ANSI/UL-60950-1) and for Canada (CSA Standard CAN/CSA-C22.2 No. 60950-1)
ELECTRO MAGNETIC INTERFERENCE EMI – RADIATED & CONDUCTED FCC Part 15(B), Class B INPUT / OUTPUT CONNECTIONS AC INPUT CONNECTION •
“IEC 320-C14” Inlet Connector on the unit
• Detachable Power Cord with: - “IEC 320-C13” Connector on one end - NEMA5-15P Plug on the other end
DC OUTPUT CONNECTORS Terminal with Tubular Hole - Diameter 5mm / 0.2” and set screw (5/64” Hex Socket Head, #10, 24 TPI, 5/16” long)
ENVIRONMENTAL OPERATING TEMPERATURE RANGE 0°C / 32°F to 40°C / 104°F
DIMENSIONS AND WEIGHT
DIMENSIONS (W X D X H) 185 x 212 x 61 mm / 7.28 x 8.35 x 2.40 in
WEIGHT 1.54 kg / 3.4 lb
3 Year Limited Warranty